Product ID:2A0-1220 PLASTI-GRIT TYPE II HARD (250 LB DRUM)
MSDS Date:03/01/1990
FSC:5350
NIIN:01-326-8204
MSDS Number: BKZCJ

COMPOSITION MATERIALS CO INC

1375 KINGS HWY EAST
FAIRFIELD, CT 06430

Emergency Phone: (203) 384-6111

Info Phone: (203) 384-6111

Cage: 98231

COMPOSITION MATERIALS CO INC

FAIRFIELD, CT 06430 US

Telephone: 203-384-6111

Cage: 98231

UREA, POLYMER W/FORMALDEHYDE

CAS: 9011-05-6

RTECS: YU1610000

Fraction By Weight: 99.5%

STEARAMIDOPROPYLDIMETHYL-BETA-HYDROXYETHYL AMMONIUM NITRATE

CAS: 2764-13-8

Fraction By Weight: <0.5%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: IRRITATION. INHALATION:
RESPIRATORY TRACT IRRITATION. INGESTION: HARMFUL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: IRRITATION. INHALATION: RESPIRATORY
TRACT IRRITATION. INGESTION: HARMFUL.

First Aid:SKIN: WASH THOROUGHLY W/SOAP & WATER. EYES: FLUSH W/WATER FOR
15 MINS. INHALATION: REMOVE TO FRESH AIR. INGESTION: INDUCE
VOMITING BY GIVING TWO GLASSES OF WATER. OBTAIN MEDICAL ATTENTION
IN ALL CASES .

Flash Point Method:PMCC
Flash Point:32F
Extinguishing Media:FOAM, DRY CHEMICAL, CO2, WATER, STEAM
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING. WEAR A FULL FACE PIECE.
Unusual Fire/Explosion Hazard:POWDER FORMS EXPLOSIVE MIXTURE W/AIR.
SEALED (CLOSED) CONTAINERS CAN BUILD UP PRESSURE IF EXPOSED TO HEAT
(FIRE).

Spill Release Procedures:SWEEP UP & PLACE IN APPROPRIATE DISPOSAL
CONTAINER. USE PROPER SAFETY EQUIPMENT.

Handling and Storage Precautions:STORE IN CLOSED, PROPERLY LABELED
CONTAINERS IN COOL VENTILATED AREA. KEEP AWAY FROM HEAT, OPEN
FLAMES, & OXIDIZING AGENTS.
Other Precautions:DON'T TRANSFER TO UNMARKED CONTAINERS.

Respiratory Protection:WEAR AN APPROVED NIOSH/MSHA PROPERLY FITTED DUST
RESPIRATOR.
Ventilation:PROVIDE MECHANICAL/LOCAL EXHAUST VENTILATION TO KEEP Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES W/SIDE SHIELD, GOGGLES
Other Protective Equipment:FACESHIELD, PROTECTIVE RUBBER APRON, SHOES
OR BOOTS
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING, SMOKING, OR
APPLYING COSMETICS. REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
THE UREA FORMALDEHYDE RESIN IS THERMOSET TO FORM A HARD INERT PLASTIC.
THERE IS NO RESIDUAL RESIN.

Spec Gravity:1.5
pH:4-8
Solubility in Water:INSOLUBLE
Appearance and Odor:GRANULAR, NO ODOR.

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:IGNITION SOURCES SUCH AS OPEN FLAMES &
EXCESSIVE HEAT
Hazardous Decomposition Products:CO, CO2, SMOKE

Waste Disposal Methods:DISPOSE OF IN A SANITARY LANDFILL IN ACCORDANCE
W/LOCAL, STATE, & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.